Home / Winstar / Winstar S1 Flash File Android Flash File MT6580

Winstar S1 Flash File Android Flash File MT6580

Welcome To adnroidfixzone, On this Site You Will Find Winstar S1 Flash File Firmware Stock Rom. the firmware with a zip package with contains Flash tool, usb driver and How To install Rom Manual instruction.This device manufactured by MediaTek MT6580 CPU. Use SP Flash Tool for flash Firmware on this device

Why Need Winstar S1 Flash File Stock Rom ?

If in any case your Winstar S1 Mobile phone Hang Stuck Logo And Restart Problem or if you had forget pin password Lock & hard reset is not working then you have to install the stock Rom again for fix your device

Following issue Will Be Fix on this Rom

Suddenly Auto On Off Restart,Stuck On Logo,While Display After Flash,Logo Hang,Dead After Flash,Monkey Virus Auto Apps Install,Storage Full,Pin Pattern Screen And Privacy Password Lock Forget,Hard Reset Not Working,OTA Update Issue,Flashing Error,Unfortunately App Has Been Stopped,Google Apps Not Working,Unknown Baseband After Flash,Auto Fastboot Mode,Auto Recovery Mode & All Software Related Issue Fix On This Rom

About Winstar S1 Firmware Information 

Brand Winstar
Model S-1
Android Version 5.1
Rom Size 631MB
Rom Source CM2 Read
File Type Scatter Factory Rom
Tool Support Smart Phone Flash Tool
Compress Zip
Drivers Mtk USB Driver
Uploaded Google Drive
Processor MT6580

Download Links

MT6580__S-1__U2__S-1__5.1__ALPS.L1.MP6.V2_YUANDA6580.WE.L

Requirements To Flash Winstar S1

  • A Windows PC Or Laptop.
  • Winstar S1 Flash File ROM Stock Firmware.
  • Mtk USB Drivers.
  • SP Flash Tool.
  • A PC detectable USB Cable.
  • Should have your device charge the battery up to 50%

Winstar S1 How Flash With SP Flash Tool

  • Download SP Flash Tool & MTK USB Driver to your PC.
  • Extract Flash Tools And Driver On Your Computer.
  • And Find The Flashtool exe And Run.
  • Go to Download Tab Click On Scatter Loading To Locate the scatter file on the extracted Winstar S1 Flash File ROM Stock Firmware folder
  • Select the scatter file in the directory.
  • Wait for it to load the files.
  • Power OFF your Winstar S1.
  • Click on Download To Flashing Process
  • Connect your Winstar S1 Flash File Smart Phone With Good USB Cable
  • Green  Ok Massage Will Appear Of Successful Flashing Complete Done.

Note :

After Install Winstar S1 Your All Data Will Be Erased . So Take A Backup Your Data After Install Firmware Otherwise Your Data Will Be Lost And That You Can’t Recover Without Restore Backup

The flashing process can erase your Winstar S1 Flash File devices data including Photos,videos,music, etc contents internal storage. We always advise to you before starting flash please make a backup for your important data then make flashing process

Check Also

Winstar W67 Flash File MT6572 Fix Hang Logo