Home / Symphony / Symphony R30 Flash File HW2 LCD Blank Fix File

Symphony R30 Flash File HW2 LCD Blank Fix File

Welcome To adnroidfixzone, On this Site You Will Find Symphony R30 Flash File Firmware Stock Rom. the firmware with a zip package with contains Flash tool, usb driver and How To install Rom Manual instruction.This device manufactured by MediaTek MT6580 CPU. Use SP Flash Tool for flash Firmware on this device

Why Need Symphony R30 Flash File Stock Rom ?

If in any case your Symphony R30 Mobile phone Hang Stuck Logo And Restart Problem or if you had forget pin password Lock & hard reset is not working then you have to install the stock Rom again for fix your device

Following issue Will Be Fix on this Rom

Suddenly Auto On Off Restart,Stuck On Logo,While Display After Flash,Logo Hang,Dead After Flash,Monkey Virus Auto Apps Install,Storage Full,Pin Pattern Screen And Privacy Password Lock Forget,Hard Reset Not Working,OTA Update Issue,Flashing Error,Unfortunately App Has Been Stopped,Google Apps Not Working,Unknown Baseband After Flash,Auto Fastboot Mode,Auto Recovery Mode & All Software Related Issue Fix On This Rom

About Symphony R30 Firmware Information 

Brand Symphony
Model R30
Android Version 7.0
Rom Size 10MB
Rom Source CM2 Readed
File Type Scatter Factory Rom
Tool Support Smart Phone Flash Tool
Compress Zip
Drivers Mtk USB Driver
Uploaded Google Drive
Processor MT6580

Download Links

After Flash Dead Or LCD Black Fix

Requirements To Flash Symphony R30

  • A Windows PC Or Laptop.
  • Symphony R30 Flash File ROM Stock Firmware.
  • Mtk USB Drivers.
  • SP Flash Tool.
  • A PC detectable USB Cable.
  • Should have your device charge the battery up to 50%

Symphony R30 How Flash With SP Flash Tool

  • Download SP Flash Tool & MTK USB Driver to your PC.
  • Extract Flash Tools And Driver On Your Computer.
  • And Find The Flashtool exe And Run.
  • Go to Download Tab Click On Scatter Loading To Locate the scatter file on the extracted Symphony R30 Flash File ROM Stock Firmware folder
  • Select the scatter file in the directory.
  • Wait for it to load the files.
  • Power OFF your Symphony R30.
  • Click on Download To Flashing Process
  • Connect your Symphony R30 Flash File Smart Phone With Good USB Cable
  • Green  Ok Massage Will Appear Of Successful Flashing Complete Done.

Note :

After Install Symphony R30 Your All Data Will Be Erased . So Take A Backup Your Data After Install Firmware Otherwise Your Data Will Be Lost And That You Can’t Recover Without Restore Backup

The flashing process can erase your Symphony R30 Flash File devices data including Photos,videos,music, etc contents internal storage. We always advise to you before starting flash please make a backup for your important data then make flashing process

Check Also

Symphony Z28 Flash File Firmware Android 10

Leave a Reply

Your email address will not be published. Required fields are marked *