Home / Mi / Mi Clone Note 5s Flash File LCD Hang Logo Fix

Mi Clone Note 5s Flash File LCD Hang Logo Fix

Welcome To adnroidfixzone, On this Site You Will Find Mi Clone Note 5s Flash File Firmware Stock Rom. the firmware with a zip package with contains Flash tool, usb driver and How To install Rom Manual instruction.This device manufactured by MediaTek MT6580 CPU. Use SP Flash Tool for flash Firmware on this device

Why Need Mi Clone Note 5s Flash File Stock Rom ?

If in any case your Mi Clone Note 5s Mobile phone Hang Stuck Logo And Restart Problem or if you had forget pin password Lock & hard reset is not working then you have to install the stock Rom again for fix your device

Following issue Will Be Fix on this Rom

Suddenly Auto On Off Restart,Stuck On Logo,While Display After Flash,Logo Hang,Dead After Flash,Monkey Virus Auto Apps Install,Storage Full,Pin Pattern Screen And Privacy Password Lock Forget,Hard Reset Not Working,OTA Update Issue,Flashing Error,Unfortunately App Has Been Stopped,Google Apps Not Working,Unknown Baseband After Flash,Auto Fastboot Mode,Auto Recovery Mode & All Software Related Issue Fix On This Rom

About Mi Clone Note 5s Firmware Information 

Brand Mi Redmi
Model Note 5s
Android Version 8.1
Rom Size 568MB
Rom Source CM Read
File Type Scatter Factory Rom
Tool Support Smart Phone Flash Tool
Compress Zip
Drivers Mtk USB Driver
Uploaded Google Drive
Processor MT6580

Download Links

MT6580__lmkj__Note_5s__Note_5s__8.1__ALPS.L1.MP6.V2_WEG.L_P73

After Flash LCD Problem Fixed

MT6580__lmkj__Note_5s__Note_5s__8.1__ALPS.L1.MP6.V2_AEON6580.WEG.L_P73

Requirements To Flash Mi Clone Note 5s

  • A Windows PC Or Laptop.
  • Mi Clone Note 5s Flash File ROM Stock Firmware.
  • Mtk USB Drivers.
  • SP Flash Tool.
  • A PC detectable USB Cable.
  • Should have your device charge the battery up to 50%

Mi Clone Note 5s How Flash With SP Flash Tool

  • Download SP Flash Tool & MTK USB Driver to your PC.
  • Extract Flash Tools And Driver On Your Computer.
  • And Find The Flashtool exe And Run.
  • Go to Download Tab Click On Scatter Loading To Locate the scatter file on the extracted Mi Clone Note 5s Flash File ROM Stock Firmware folder
  • Select the scatter file in the directory.
  • Wait for it to load the files.
  • Power OFF your Mi Clone Note 5s.
  • Click on Download To Flashing Process
  • Connect your Mi Clone Note 5s Flash File Smart Phone With Good USB Cable
  • Green  Ok Massage Will Appear Of Successful Flashing Complete Done.

Note :

After Install Mi Clone Note 5s Your All Data Will Be Erased . So Take A Backup Your Data After Install Firmware Otherwise Your Data Will Be Lost And That You Can’t Recover Without Restore Backup

The flashing process can erase your Mi Clone Note 5s Flash File devices data including Photos,videos,music, etc contents internal storage. We always advise to you before starting flash please make a backup for your important data then make flashing process

Check Also

MI Clone 8X Flash File Stock Firmware

Leave a Reply

Your email address will not be published. Required fields are marked *