Home / Gretel / Gretel G3 Flash File MTK Version Stock Rom

Gretel G3 Flash File MTK Version Stock Rom

Welcome To adnroidfixzone, On this Site You Will Find Gretel G3 Flash File Firmware Stock Rom. the firmware with a zip package with contains Flash tool, usb driver and How To install Rom Manual instruction.This device manufactured by MediaTek MT6580 CPU. Use SP Flash Tool for flash Firmware on this device

Why Need Gretel G3 Flash File Stock Rom ?

If in any case your Gretel G3 Mobile phone Hang Stuck Logo And Restart Problem or if you had forget pin password Lock & hard reset is not working then you have to install the stock rom again for fix your device

Following issue Will Be Fix on this Rom

Suddenly Auto On Off Restart,Stuck On Logo,While Display After Flash,Logo Hang,Dead After Flash,Monkey Virus Auto Apps Install,Storage Full,Pin Pattern Screen And Privacy Password Lock Forget,Hard Reset Not Working,OTA Update Issue,Flashing Error,Unfortunately App Has Been Stopped,Google Apps Not Working,Unknown Baseband After Flash,Auto Fastboot Mode,Auto Recovery Mode & All Software Related Issue Fix On This Rom

About Gretel G3 Firmware Information 

Brand Gretel
Model G3
Android Version 6.0 Skin Show
Rom Size 478MB
Rom Source CM2 Backup File
File Type Scatter Factory Rom
Tool Support Smart Phone Flash Tool
Compress Zip
Drivers Mtk USB Driver
Uploaded Google Drive
Processor MT6580

Download Links

MT6580__Gretel__S6__G3__6.0__alps-mp-m0.mp1-V2.34_long6580.we.m_P6

Requirements To Flash Gretel G3

  • A Windows PC Or Laptop.
  • Gretel G3 Flash File ROM Stock Firmware.
  • Mtk USB Drivers.
  • SP Flash Tool.
  • A PC detectable USB Cable.
  • Should have your device charge the battery up to 50%

Gretel G3 How Flash With SP Flash Tool

  • Download SP Flash Tool & MTK USB Driver to your PC.
  • Extract Flash Tools And Driver On Your Computer.
  • And Find The Flashtool exe And Run.
  • Go to Download Tab Click On Scatter Loading To Locate the scatter file on the extracted Gretel G3 Flash File ROM Stock Firmware folder
  • Select the scatter file in the directory.
  • Wait for it to load the files.
  • Power OFF your Gretel G3.
  • Click on Download To Flashing Process
  • Connect your Gretel G3 Flash File Smart Phone With Good USB Cable
  • Green  Ok Massage Will Appear Of Successful Flashing Complete Done.

Note :

After Install Gretel G3 Your All Data Will Be Erased . So Take A Backup Your Data After Install Firmware Otherwise Your Data Will Be Lost And That You Can’t Recover Without Restore Backup

The flashing process can erase your Gretel G3 Flash File devices data including Photos,videos,music, etc contents internal storage. We always advise to you before starting flash please make a backup for your important data then make flashing process

Check Also

Gretel G5 Flash File MT6572 CPU Version

Leave a Reply

Your email address will not be published. Required fields are marked *