Home / Micronex / Micronex MX 53 Plus Flash File | Update

Micronex MX 53 Plus Flash File | Update

Welcome To adnroidfixzone, On this Site You Will Find Micronex MX-53 Flash File Firmware Stock Rom. the firmware with a zip package with contains Flash tool, usb driver and How To install Rom Manual instruction.This device manufactured by MediaTek MT6580 CPU. Use SP Flash Tool for flash Firmware on this device

Why Need Micronex MX-53 Flash File Stock Rom ?

If in any case your Micronex MX-53 Mobile phone Hang Stuck Logo And Restart Problem or if you had forget pin password Lock & hard reset is not working then you have to install the stock rom again for fix your device

Following issue Will Be Fix on this Rom

Suddenly Auto On Off Restart,Stuck On Logo,While Display After Flash,Logo Hang,Dead After Flash,Monkey Virus Auto Apps Install,Storage Full,Pin Pattern Screen And Privacy Password Lock Forget,Hard Reset Not Working,OTA Update Issue,Flashing Error,Unfortunately App Has Been Stopped,Google Apps Not Working,Unknown Baseband After Flash,Auto Fastboot Mode,Auto Recovery Mode & All Software Related Issue Fix On This Rom

About Micronex MX-53 Firmware Information 

Brand Micronex
Model MX-53
Android Version 5.1
Rom Size 697MB
Rom Source CM Read
File Type Scatter Factory Rom
Tool Support Smart Phone Flash Tool
Compress Zip
Drivers Mtk USB Driver
Uploaded Google Drive
Processor MT6580

Download Links

Fix Hang Logo

MT6580__alps__MX-53_Plus__MX_53_Plus__5.1__ALPS.L1.MP6.V2.19_HCT6580.WEG.A.L_P55

Requirements To Flash Micronex MX-53

  • A Windows PC Or Laptop.
  • Micronex MX-53 Flash File ROM Stock Firmware.
  • Mtk USB Drivers.
  • SP Flash Tool.
  • A PC detectable USB Cable.
  • Should have your device charge the battery up to 50%

Micronex MX-53 How Flash With SP Flash Tool

  • Download SP Flash Tool & MTK USB Driver to your PC.
  • Extract Flash Tools And Driver On Your Computer.
  • And Find The Flashtool exe And Run.
  • Go to Download Tab Click On Scatter Loading To Locate the scatter file on the extracted Micronex MX-53 Flash File ROM Stock Firmware folder
  • Select the scatter file in the directory.
  • Wait for it to load the files.
  • Power OFF your Micronex MX-53.
  • Click on Download To Flashing Process
  • Connect your Micronex MX-53 Flash File Smart Phone With Good USB Cable
  • Green  Ok Massage Will Appear Of Successful Flashing Complete Done.

Note :

After Install Micronex MX-53 Your All Data Will Be Erased . So Take A Backup Your Data After Install Firmware Otherwise Your Data Will Be Lost And That You Can’t Recover Without Restore Backup

The flashing process can erase your Micronex MX-53 Flash File devices data including Photos,videos,music, etc contents internal storage. We always advise to you before starting flash please make a backup for your important data then make flashing process

Check Also

Micronex MX-54 Flash File Android 7.1 & 5.1 All Update

Leave a Reply

Your email address will not be published. Required fields are marked *