Home / Home / Walton Primo H7S Flash File | After Flash Fastboot Problem Fixed

Walton Primo H7S Flash File | After Flash Fastboot Problem Fixed

Welcome To adnroidfixzone, On this Site You Will Find Walton H7s Flash File Firmware Stock Rom. the firmware with a zip package with contains Flash tool, usb driver and How To install Rom Manual instruction.This device manufactured by MediaTek MT6739 CPU. Use SP Flash Tool for flash Firmware on this device

Why Need Walton H7s Flash File Stock Rom ?

If in any case your Walton H7s Mobile phone Hang Stuck Logo And Restart Problem or if you had forget pin password Lock & hard reset is not working then you have to install the stock rom again for fix your device

Following issue Will Be Fix on this Rom

Suddenly Auto On Off Restart,Stuck On Logo,While Display After Flash,Logo Hang,Dead After Flash,Monkey Virus Auto Apps Install,Storage Full,Pin Pattern Screen And Privacy Password Lock Forget,Hard Reset Not Working,OTA Update Issue,Flashing Error,Unfortunately App Has Been Stopped,Google Apps Not Working,Unknown Baseband After Flash,Auto Fastboot Mode,Auto Recovery Mode & All Software Related Issue Fix On This Rom

About Walton H7s Firmware Information 

Brand Walton
Model Primo H7s
Android Version 8.1
Rom Size 1GB
Rom Source Offcial Care
File Type Scatter Factory Rom
Tool Support Smart Phone Flash Tool
Compress Zip
Drivers Mtk USB Driver
Uploaded Google Drive
Processor MT6739

Download Links

After Flash Fastboot Mode Show Only Fix On This Rom

Requirements To Flash Walton H7s

  • A Windows PC Or Laptop.
  • Walton H7s Flash File ROM Stock Firmware.
  • Mtk USB Drivers.
  • SP Flash Tool.
  • A PC detectable USB Cable.
  • Should have your device charge the battery up to 50%

Walton H7s How Flash With SP Flash Tool

  • Download SP Flash Tool & MTK USB Driver to your PC.
  • Extract Flash Tools And Driver On Your Computer.
  • And Find The Flashtool exe And Run.
  • Go to Download Tab Click On Scatter Loading To Locate the scatter file on the extracted Walton H7s Flash File ROM Stock Firmware folder
  • Select the scatter file in the directory.
  • Wait for it to load the files.
  • Power OFF your Walton H7s.
  • Click on Download To Flashing Process
  • Connect your Walton H7s Flash File Smart Phone With Good USB Cable
  • Green  Ok Massage Will Appear Of Successful Flashing Complete Done.

Note :

After Install Walton H7s Your All Data Will Be Erased . So Take A Backup Your Data After Install Firmware Otherwise Your Data Will Be Lost And That You Can’t Recover Without Restore Backup

The flashing process can erase your Walton H7s Flash File devices data including Photos,videos,music, etc contents internal storage. We always advise to you before starting flash please make a backup for your important data then make flashing process

Check Also

Aone A50 Flash File All Update Fix Rom

Leave a Reply

Your email address will not be published. Required fields are marked *